Mercedes 280 SE 1968

In November 1967 Mercedes Benz introduced the 280 SE. It was powered by the new 2778 cc M130 engine, which produced 160 hp (119 kW) at 5500 rpm. Top speed was hardly affected, but acceleration from 0-100 km/h (62 mph) improved to 10.5 seconds (13 with automatic transmission). Inside, the car received a wood veneer option on the dashboard and other minor changes, including door lock buttons and different heater levers. The hubcaps were changed yet again to a new one piece wheelcover, and the exterior mirror was changed. Despite its smaller engine, the 280 SE could outperform the early 1950s M189 powered 300 SE, resulting in the more expensive model's retirement. A final model was added in August 1969, the 280 SE 3.5, the first Mercedes post-War coupé with more than 3 litres. The car was fitted with the brand-new M116 3499 cc V8. It produced 200 hp (150 kW) at 5800 rpm, and a top speed of 210 km/h (130 mph) (205 km/h (127 mph) with automatic transmission) and a 0-100 km/h (62 mph) at 9.5 seconds (11.5 for the automatic transmission). As one of several changes to modernize the aging design a lower, wider grille was incorporated and the facelifted model is often by the Germans referred to as the "flachkühler". The new grill was not a side-effect of enlarging the engine compartment to accommodate the V8 despite popular belief. Front and rear bumpers were also modified with the addition of rubber rub strips; the rear lenses changed to a flatter cleaner design. This change was carried across to the standard 280 SE. As the top of its range, the 280 SE 3.5 is seen as an ideological successor to the W112 300 SE, though it lacked the W112's air suspension.